搭建或配置网络环境时,经常会使用ping命令检查网络是否可达。有些时候Ping命令也不好使,比如因防火墙禁止或访问策略限制等。则可使用telnet测试映射端口或远程访问主机。
Telnet协议是TCP/IP协议族的其中之一,是Internet远程登录服务的标准协议和主要方式,常用于网页服务器的`远程控制,可供使用者在本地主机运行远程主机上的工作。 那么H3C交换机如何设置TELNET登陆?下面he本站小编一起来看看H3C交换机TELNET登陆常用配置命令吧!
进入console0口:
[H3C]user-interface aux 0(S)
修改验证模式:
[H3C-ui-aux0]authentication-mode password
设置aux0 口密码:
[H3C-ui-console0]set authentication password cipher | simple wisdom
进入VLAN1接口视图:
[H3C]interface Vlan-interface 1
为该接口设置IP:
[H3C-Vlan-interface1]ip address
[H3C-Vlan-interface1]ip address 24
进入vty 0 4接口:
[H3C]user-interface vty 0 4
设置密码模式:
[H3C-ui-vty0-4]authentication-mode password
设置密码:
[H3C-ui-vty0-4]set authentication password cipher|simple wisdom
设置登录级别:
[H3C-ui-vty0-4]user privilege level 3